주요 콘텐츠로 건너뛰기

MacBook Pro 15" Unibody 2.53 GHz Mid 2009 RAM Replacement

필요한 것

  1. MacBook Pro 15" Unibody 2.53 GHz Mid 2009 RAM Replacement, Lower Case: 1 단계, 이미지 1/1
    • Remove the following ten screws securing the lower case to the upper case:

    • Seven 3 mm Phillips screws.

    • Three 13.5 mm Phillips screws.

  2. MacBook Pro 15" Unibody 2.53 GHz Mid 2009 RAM Replacement: 2 단계, 이미지 1/1
    • Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.

    • Remove the lower case and set it aside.

  3. MacBook Pro 15" Unibody 2.53 GHz Mid 2009 RAM Replacement, RAM: 3 단계, 이미지 1/2 MacBook Pro 15" Unibody 2.53 GHz Mid 2009 RAM Replacement, RAM: 3 단계, 이미지 2/2
    • Release the tabs on each side of the chip by simultaneously pushing each tab away from the RAM.

    • These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

    • After the RAM chip has popped up, pull it straight out of its socket.

    • Repeat this process if a second RAM chip is installed.

결론

To reassemble your device, follow these instructions in reverse order.

다른 96명이 해당 안내서를 완성하였습니다.

Walter Galan

694,644 평판

안내서 1,203개 작성하였습니다

댓글 한 개

How is this easier than removing a drive? Its both relatively easy. Otherwise good guides.

Jr. - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 14

30일 전: 33

전체 시간: 40,952