기기를 수리하세요

수리할 권리

상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

MacBook Pro 15" Unibody Early 2011 AirPort/Bluetooth Board Assembly Replacement

작성자 Walter Galan (또 다른 기여자 3명)
  • 댓글 20
  • 즐겨찾기 1

난이도

보통

단계

6

소요 시간

시간 제안??

섹션

1

플래그

1

Prerequisite Only

단지 전제 조건

해당 안내서는 단지 다른 안내서의 전제 조건임을 참고하시기 바랍니다.

소개

This guide is prereq only.

도구

해당 도구 구매

부품

지정된 부품이 없습니다.

  1. Pull the camera cable connector straight out of its socket on the logic board.

    • Pull the camera cable connector straight out of its socket on the logic board.

    • Pull the cable parallel to the face of the logic board toward the optical drive opening.

    편집

  2. Use the flat end of a spudger to carefully pry the AirPort/Bluetooth ribbon cable up off its socket on the logic board.

    • Use the flat end of a spudger to carefully pry the AirPort/Bluetooth ribbon cable up off its socket on the logic board.

    편집

  4. Use the tip of a spudger to pry the four antenna connectors up from their sockets on the AirPort/Bluetooth board. Use the tip of a spudger to pry the four antenna connectors up from their sockets on the AirPort/Bluetooth board.

    • Use the tip of a spudger to pry the four antenna connectors up from their sockets on the AirPort/Bluetooth board.

    편집

  5. De-route all four antenna cables from their channels in the AirPort/Bluetooth housing. De-route the camera cable from its channel in the AirPort/Bluetooth housing. De-route the camera cable from its channel in the AirPort/Bluetooth housing.

    • De-route all four antenna cables from their channels in the AirPort/Bluetooth housing.

    • De-route the camera cable from its channel in the AirPort/Bluetooth housing.

    편집

  6. Remove the following two screws securing the AirPort/Bluetooth assembly to the upper case:

    • Remove the following two screws securing the AirPort/Bluetooth assembly to the upper case:

    • One 8.6 mm Phillips screw

    • One 3.9 mm Phillips screw

    편집

  7. Remove the AirPort/Bluetooth assembly from the upper case, minding any cables that may get caught.

    • Remove the AirPort/Bluetooth assembly from the upper case, minding any cables that may get caught.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Walter Galan

653,174 평판

안내서 1,203개 작성하였습니다

배지: 53

배지 +50개 더

댓글 0개

의견 추가하세요

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 448