주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

MacBook Pro 17" Unibody Camera Board Assembly Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. MacBook Pro 17" Unibody Camera Board Assembly Replacement, Camera Board Assembly: 1 단계, 이미지 1/1
    • Remove the two 2.7 mm Phillips #00 screws securing the camera board to the rear display bezel.

  2. MacBook Pro 17" Unibody Camera Board Assembly Replacement: 2 단계, 이미지 1/1
    • Lift and remove the camera assembly out of the rear display bezel.

결론

To reassemble your device, follow these instructions in reverse order.

Brett Hartt

회원 가입일: 04/12/10

127,749 평판

안내서 143개 작성하였습니다

iFixit iFixit 회원

Staff

136 회원들

안내서 16,573개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 398