주요 콘텐츠로 건너뛰기

MacBook Pro 17" Unibody Lower Case Replacement

필요한 것

  1. MacBook Pro 17" Unibody Lower Case Replacement, Lower Case: 1 단계, 이미지 1/1
    • Remove the following ten screws securing the lower case to the upper case:

    • Three 13.5 mm Phillips screws.

    • Seven 3 mm Phillips screws.

  2. MacBook Pro 17" Unibody Lower Case Replacement: 2 단계, 이미지 1/2 MacBook Pro 17" Unibody Lower Case Replacement: 2 단계, 이미지 2/2
    • Wedge your fingers between the lower case and the vent, and lift upward to release the two clips holding the lower case to the upper case.

    • During reassembly, carefully align the lower case and then press it firmly until both clips engage.

    • Remove the lower case.

결론

To reassemble your device, follow these instructions in reverse order.

다른 19명이 해당 안내서를 완성하였습니다.

Andrew Bookholt

585,714 평판

안내서 619개 작성하였습니다

댓글 한 개

Is there a DIY on replacing the rubber feet?

retrotechpost - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 11

30일 전: 35

전체 시간: 17,834