기기를 수리하세요 커뮤니티 상점

Mad Catz Dual Force 2 Pro Analog Joystick Covers Replacement

소개

Please remember that these controllers are not designed to be repaired so do not be surprised if you need to be rough with it or something was not initially installed correctly. Also, the same kind of screw was used throughout the controller.

필요한 것

  1. Mad Catz Dual Force 2 Pro Analog Joystick Covers Replacement, Remove Cover: 1 단계, 이미지 1/1

    • Remove the six 7 mm Phillips screws from the rear cover.

    번역하기

  2. Mad Catz Dual Force 2 Pro Analog Joystick Covers Replacement: 2 단계, 이미지 1/1

    • Remove the back of the controller.

    • There are no loose items in the controller that can fall out, so you can open it, generally, however you want.

    번역하기

  4. Mad Catz Dual Force 2 Pro Analog Joystick Covers Replacement: 3 단계, 이미지 1/1

    • Remove the two 7 mm screws on the closest circuit board.

    번역하기

  5. Mad Catz Dual Force 2 Pro Analog Joystick Covers Replacement: 4 단계, 이미지 1/2 Mad Catz Dual Force 2 Pro Analog Joystick Covers Replacement: 4 단계, 이미지 2/2

    • Lift the closest circuit board away from the motherboard.

    • Be sure you do not tear the ribbon connecting the smaller circuit board to the motherboard.

    번역하기

  6. Mad Catz Dual Force 2 Pro Analog Joystick Covers Replacement: 5 단계, 이미지 1/1

    • Grip the analog stick you wish to remove and the smaller circuit board or the cover.

    • Pull the analog stick from the smaller circuit board.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Alexander Coyne

회원 가입일: 01/11/15

658 평판

안내서 5개 작성하였습니다

배지: 8

배지 +5개 더

팀

USF Tampa, Team 7-2, Remmell Winter 2015 USF Tampa, Team 7-2, Remmell Winter 2015 회원

USFT-REMMELL-W15S7G2

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 6

전체 시간: 604