주요 콘텐츠로 건너뛰기

Magellan RoadMate 1440 Power Switch Replacement

필요한 것

  1. Magellan RoadMate 1440 Power Switch Replacement, Magellan RoadMate 1440 Back Cover Disassembly: 1 단계, 이미지 1/1
    • Place the GPS with the screen facing down.

  2. Magellan RoadMate 1440 Power Switch Replacement: 2 단계, 이미지 1/2 Magellan RoadMate 1440 Power Switch Replacement: 2 단계, 이미지 2/2
    • Remove the four 4.2 mm screws on the back cover of the device using a Phillips #0 screwdriver.

  3. Magellan RoadMate 1440 Power Switch Replacement: 3 단계, 이미지 1/2 Magellan RoadMate 1440 Power Switch Replacement: 3 단계, 이미지 2/2
    • Remove the two 4.2mm screws at the bottom of the device using a Phillips #0 screwdriver.

  4. Magellan RoadMate 1440 Power Switch Replacement: 4 단계, 이미지 1/3 Magellan RoadMate 1440 Power Switch Replacement: 4 단계, 이미지 2/3 Magellan RoadMate 1440 Power Switch Replacement: 4 단계, 이미지 3/3
    • Insert the black spudger into the crease in the side of the GPS.

    • Move the end of the spudger down to break the seal between the two plastic shells.

    • Continue doing this along each side of the GPS to ensure a smooth removal.

  5. Magellan RoadMate 1440 Power Switch Replacement: 5 단계, 이미지 1/3 Magellan RoadMate 1440 Power Switch Replacement: 5 단계, 이미지 2/3 Magellan RoadMate 1440 Power Switch Replacement: 5 단계, 이미지 3/3
    • Fully separate the two sides of the case.

    • Remove the tape on the battery wires and the tape on the speaker wires.

  6. Magellan RoadMate 1440 Power Switch Replacement, Power Switch: 6 단계, 이미지 1/1
    • Once the back cover has been removed, lift the power switch from the device.

    • This is only a sliding switch, the button to power the device on is inside the unit

결론

To reassemble your device, follow these instructions in reverse order.

Jeremy Johnson

회원 가입일: 03/21/16

201 평판

안내서 2개 작성하였습니다

Clemson, Team 7-3, Benson Spring 2016 Clemson, Team 7-3, Benson Spring 2016 회원

CLEM-BENSON-S16S7G3

4 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 3

전체 시간: 194