주요 콘텐츠로 건너뛰기

Magellan RoadMate 1440 Screen Replacement

필요한 것

  1. Magellan RoadMate 1440 Screen Replacement, Magellan RoadMate 1440 Back Cover Disassembly: 1 단계, 이미지 1/1
    • Place the GPS with the screen facing down.

  2. Magellan RoadMate 1440 Screen Replacement: 2 단계, 이미지 1/2 Magellan RoadMate 1440 Screen Replacement: 2 단계, 이미지 2/2
    • Remove the four 4.2 mm screws on the back cover of the device using a Phillips #0 screwdriver.

  3. Magellan RoadMate 1440 Screen Replacement: 3 단계, 이미지 1/2 Magellan RoadMate 1440 Screen Replacement: 3 단계, 이미지 2/2
    • Remove the two 4.2mm screws at the bottom of the device using a Phillips #0 screwdriver.

  4. Magellan RoadMate 1440 Screen Replacement: 4 단계, 이미지 1/3 Magellan RoadMate 1440 Screen Replacement: 4 단계, 이미지 2/3 Magellan RoadMate 1440 Screen Replacement: 4 단계, 이미지 3/3
    • Insert the black spudger into the crease in the side of the GPS.

    • Move the end of the spudger down to break the seal between the two plastic shells.

    • Continue doing this along each side of the GPS to ensure a smooth removal.

  5. Magellan RoadMate 1440 Screen Replacement: 5 단계, 이미지 1/3 Magellan RoadMate 1440 Screen Replacement: 5 단계, 이미지 2/3 Magellan RoadMate 1440 Screen Replacement: 5 단계, 이미지 3/3
    • Fully separate the two sides of the case.

    • Remove the tape on the battery wires and the tape on the speaker wires.

  6. Magellan RoadMate 1440 Screen Replacement, Battery: 6 단계, 이미지 1/2 Magellan RoadMate 1440 Screen Replacement, Battery: 6 단계, 이미지 2/2
    • Use the black spudger to break the seal between the adhesive and battery. Use the same spudger to continue to pry the battery from the backing

    • This may be a little tough to separate the battery and the adhesive

  7. Magellan RoadMate 1440 Screen Replacement: 7 단계, 이미지 1/2 Magellan RoadMate 1440 Screen Replacement: 7 단계, 이미지 2/2
    • Lift the battery from the device

    • Once the battery is free from the adhesive, remove the piece of tape with a pair of tweezers that is covering the connection of the battery to the motherboard.

  8. Magellan RoadMate 1440 Screen Replacement: 8 단계, 이미지 1/2 Magellan RoadMate 1440 Screen Replacement: 8 단계, 이미지 2/2
    • Unplug the battery from the mother board by pulling back the clips and pulling the wires away from the motherboards receptacle

    • It is important for your and the device's safety to remove the battery before continuing with any other part removals.

    • It is not necessary to separate the red and white wires from the battery. A replacement battery pack will come with similar wires already attached.

  9. Magellan RoadMate 1440 Screen Replacement, Screen: 9 단계, 이미지 1/1
    • Replace the device's screen.

  10. Magellan RoadMate 1440 Screen Replacement: 10 단계, 이미지 1/3 Magellan RoadMate 1440 Screen Replacement: 10 단계, 이미지 2/3 Magellan RoadMate 1440 Screen Replacement: 10 단계, 이미지 3/3
    • It may be necessary to get help from a friend to hold the device stable while removing the screen.

    • Using two hands, pull back the tabs holding the screen in place.

    • Use a spudger to help use leverage to remove the screen, if necessary

  11. Magellan RoadMate 1440 Screen Replacement: 11 단계, 이미지 1/2 Magellan RoadMate 1440 Screen Replacement: 11 단계, 이미지 2/2
    • Raise the switch locking the ribbon cable in place.

    • Using twesers, pull the ribbon cable from the socket.

  12. Magellan RoadMate 1440 Screen Replacement: 12 단계, 이미지 1/2 Magellan RoadMate 1440 Screen Replacement: 12 단계, 이미지 2/2
    • With the ribbon cable removed, the screen is completely disconnected from the device.

    • To replace the ribbon cable, press the two tabs to push the head into the socket.

결론

To reassemble your device, follow these instructions in reverse order.

Miller Hall

회원 가입일: 03/21/16

325 평판

안내서 2개 작성하였습니다

Clemson, Team 7-3, Benson Spring 2016 Clemson, Team 7-3, Benson Spring 2016 회원

CLEM-BENSON-S16S7G3

4 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 404