Magellan RoadMate 5120-LMTX Speaker Replacement

소개

The speaker removal process is easy to accomplish. The device has wires that can be damaged if you are not careful when opening the device. There will be tape holding some of the wires in place. Make sure to retain the tape or have more tape on hand so that it can be reapplied when reassembling your RoadMate.

필요한 것

1 단계 Back Cover

Magellan RoadMate 5120-LMTX Speaker Replacement, Back Cover: 1 단계, 이미지 1/3

Magellan RoadMate 5120-LMTX Speaker Replacement, Back Cover: 1 단계, 이미지 2/3

Magellan RoadMate 5120-LMTX Speaker Replacement, Back Cover: 1 단계, 이미지 3/3

Power off the Magellan RoadMate before beginning.
Remove the six 5mm Phillips #00 screws from the back of device.

편집

2 단계

Magellan RoadMate 5120-LMTX Speaker Replacement: 2 단계, 이미지 3/3

Pry back cover off with a plastic opening tool just enough to see where the speaker is attached to the motherboard.
Do not fully open the back cover or you risk damaging the speaker wire.
Use a spudger to disconnect the speaker connection from the motherboard.