주요 콘텐츠로 건너뛰기

Magic Bullet NutriBullet Base Replacement

필요한 것

  1. Magic Bullet NutriBullet Base Replacement, Base: 1 단계, 이미지 1/1
    • Unplug the device from the wall and turn the powerbase upside down.

  2. Magic Bullet NutriBullet Base Replacement: 2 단계, 이미지 1/2 Magic Bullet NutriBullet Base Replacement: 2 단계, 이미지 2/2
    • Unscrew the four 10mm screws located on the bottom of the powerbase using the Phillips Head #2 Screwdriver.

  3. Magic Bullet NutriBullet Base Replacement: 3 단계, 이미지 1/1
    • Once the screws are removed, use slight tension to pull the plastic base up.

    • Make sure the cord does not get caught or frayed by the fan, which is located in the center of the power base.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Angela Wong

회원 가입일: 01/22/15

1,090 평판

안내서 3개 작성하였습니다

Cal Poly, Team 19-8, Maness Winter 2015 Cal Poly, Team 19-8, Maness Winter 2015 회원

CPSU-MANESS-W15S19G8

4 회원들

안내서 10개 작성하였습니다

댓글 3개

So far it was easy! Yeah!

Elaine - 답글

With a lot of force can’t get bottom of even 4 screws removed Bullet don’t work anymore may be a piece of junk now

Tommy Simpson - 답글

Where can you buy the base to replace?

Anne-Christine von Wetter - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 5

30일 전: 41

전체 시간: 9,462