Makita DT01 Trigger Switch Replacement - iFixit 수리 안내서

소개

This will teach you how to replace your trigger switch on your Makita DT01 drill.

필요한 것

1 단계 Battery

Makita DT01 Trigger Switch Replacement, Battery: 1 단계, 이미지 1/3

Makita DT01 Trigger Switch Replacement, Battery: 1 단계, 이미지 2/3

Makita DT01 Trigger Switch Replacement, Battery: 1 단계, 이미지 3/3

Lay the device down on its side.

2 단계

Makita DT01 Trigger Switch Replacement: 2 단계, 이미지 1/1

Pinch the indents on both sides of the battery.

3 단계

Makita DT01 Trigger Switch Replacement: 3 단계, 이미지 1/1

Pull the battery out of the drill
Recharge or completely replace the battery
Make sure that the battery is removed before further working on the drill. This is so the drill doesn't accidentally activate.

4 단계 Trigger Switch

Makita DT01 Trigger Switch Replacement, Trigger Switch: 4 단계, 이미지 1/1

Unscrew all six 15mm screws with a JIS1 screwdriver bit.

5 단계

Makita DT01 Trigger Switch Replacement: 5 단계, 이미지 1/1

Remove the top of the plastic drill case

6 단계

Makita DT01 Trigger Switch Replacement: 6 단계, 이미지 1/1

Remove the bottom of the plastic drill case

7 단계

Makita DT01 Trigger Switch Replacement: 7 단계, 이미지 1/1

Use your tweezers to remove the black wire from the motor

8 단계

Makita DT01 Trigger Switch Replacement: 8 단계, 이미지 1/1

Use your tweezers to remove the red wire from the motor

9 단계

Makita DT01 Trigger Switch Replacement: 9 단계, 이미지 1/1

Your trigger switch should now be removed from your motor

10 단계

Makita DT01 Trigger Switch Replacement: 10 단계, 이미지 1/1

Use your tweezers to remove the red and black wires from the two-pronged plug

11 단계

Makita DT01 Trigger Switch Replacement: 11 단계, 이미지 1/1

Your trigger switch is now detached from the device

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Victoria Scira

회원 가입일: 02/15/17

226 평판

안내서 2개 작성하였습니다

배지 +2개 더

댓글 0개

조회 통계:

24 시간 전: 1

7일 전: 5

30일 전: 10

전체 시간: 648