기기를 수리하세요 커뮤니티 상점

Makita XPH01 Drill Brush Replacement

소개

The drill contains two drill brushes. This guide will show you the necessary steps to locate and replace both drill brushes. It shows how to remove the battery and back panel to locate the drill brushes.

필요한 것

  1. Makita XPH01 Drill Brush Replacement, Battery: 1 단계, 이미지 1/1

    • Hold the drill upright.

    • Place your finger on the white battery-release button.

    번역하기

  2. Makita XPH01 Drill Brush Replacement: 2 단계, 이미지 1/1

    • Press and hold the white release button located on the front of the battery.

    번역하기

  3. Makita XPH01 Drill Brush Replacement: 3 단계, 이미지 1/1

    • Slide the battery forward while pressing down on the white battery-release button.

    번역하기

  5. Makita XPH01 Drill Brush Replacement, Drill Brush: 4 단계, 이미지 1/1

    • Hold the drill upright with the back panel facing you.

    번역하기

  6. Makita XPH01 Drill Brush Replacement: 5 단계, 이미지 1/2 Makita XPH01 Drill Brush Replacement: 5 단계, 이미지 2/2

    • Unscrew two 18mm screws from the back panel with the Phillips PH2 screwdriver.

    번역하기

  7. Makita XPH01 Drill Brush Replacement: 6 단계, 이미지 1/2 Makita XPH01 Drill Brush Replacement: 6 단계, 이미지 2/2

    • Apply slight pressure to the sides of the backplate and pull away from the drill.

    번역하기

  8. Makita XPH01 Drill Brush Replacement: 7 단계, 이미지 1/3 Makita XPH01 Drill Brush Replacement: 7 단계, 이미지 2/3 Makita XPH01 Drill Brush Replacement: 7 단계, 이미지 3/3

    • Hold the drill so the back end is facing toward you.

    • Use the spudger to lift the spring clip out of the back notch.

    • Pull the spring clip forward and rest it in the front notch.

    번역하기

  9. Makita XPH01 Drill Brush Replacement: 8 단계, 이미지 1/2 Makita XPH01 Drill Brush Replacement: 8 단계, 이미지 2/2

    • Use the tweezers to pull the drill brush away from the sleeve.

    번역하기

  10. Makita XPH01 Drill Brush Replacement: 9 단계, 이미지 1/3 Makita XPH01 Drill Brush Replacement: 9 단계, 이미지 2/3 Makita XPH01 Drill Brush Replacement: 9 단계, 이미지 3/3

    • Use the plastic opening tool to release the clip connected to the drill brush.

    • Separate the drill brush away from the clip.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Eric Herwatt

회원 가입일: 10/05/16

984 평판

안내서 7개 작성하였습니다

배지: 12

배지 +9개 더

팀

Cal Poly, Team 15-4, Livingston Fall 2016 Cal Poly, Team 15-4, Livingston Fall 2016 회원

CPSU-LIVINGSTON-F16S15G4

4 회원들

안내서 7개 작성하였습니다

댓글 한 개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 14

30일 전: 23

전체 시간: 5,833