주요 콘텐츠로 건너뛰기

Maylong MN-1000P Screen Replacement

필요한 것

  1. Maylong MN-1000P Screen Replacement, Bottom Cover: 1 단계, 이미지 1/1
    • Place the netbook top down, with the opening of the netbook facing you.

  2. Maylong MN-1000P Screen Replacement: 2 단계, 이미지 1/1
    • Remove the six 6mm Phillips #00 screws from the netbook.

  3. Maylong MN-1000P Screen Replacement: 3 단계, 이미지 1/3 Maylong MN-1000P Screen Replacement: 3 단계, 이미지 2/3 Maylong MN-1000P Screen Replacement: 3 단계, 이미지 3/3
    • Remove the sticker in the middle of the netbook.

    • Remove the middle 6mm Phillips #00 screw.

  4. Maylong MN-1000P Screen Replacement: 4 단계, 이미지 1/1
    • Using two plastic opening tools, pry off the bottom of the netbook by going around the edges.

  5. Maylong MN-1000P Screen Replacement: 5 단계, 이미지 1/1
    • Remove the bottom of the netbook by lifting the corners.

  6. Maylong MN-1000P Screen Replacement, Battery: 6 단계, 이미지 1/2 Maylong MN-1000P Screen Replacement, Battery: 6 단계, 이미지 2/2
    • Pinch the red and black wires connected to the section closest to the small white connector, and pull to remove them from the motherboard.

  7. Maylong MN-1000P Screen Replacement, Screen: 7 단계, 이미지 1/1
    • Remove the six 6mm Phillips #00 screws from both sides of the netbook.

  8. Maylong MN-1000P Screen Replacement: 8 단계, 이미지 1/2 Maylong MN-1000P Screen Replacement: 8 단계, 이미지 2/2
    • Pull the top of the computer and the back side of the computer away from each other until they are detached.

    • Flip the entire computer over so you can see both the screen and keyboard.

  9. Maylong MN-1000P Screen Replacement: 9 단계, 이미지 1/2 Maylong MN-1000P Screen Replacement: 9 단계, 이미지 2/2
    • Remove all the black circular pads from around the screen.

    • Remove all 6mm Phillips #00 screws from around the screen bezel.

  10. Maylong MN-1000P Screen Replacement: 10 단계, 이미지 1/1
    • Using a plastic opening tool, pry off the screen bezel.

    • After detaching the screen bezel, pull up on the bezel near the hinge area.

  11. Maylong MN-1000P Screen Replacement: 11 단계, 이미지 1/1
    • Use tweezers to gently pull on the black and white wires at the top of the netbook until the white connector detaches.

  12. Maylong MN-1000P Screen Replacement: 12 단계, 이미지 1/1
    • Use your fingers to pull on the green, red, black, and white intertwined wires at the bottom of the netbook until the white connector detaches.

  13. Maylong MN-1000P Screen Replacement: 13 단계, 이미지 1/3 Maylong MN-1000P Screen Replacement: 13 단계, 이미지 2/3 Maylong MN-1000P Screen Replacement: 13 단계, 이미지 3/3
    • Detach the wide yellow ribbon cable connected to the screen from the computer.

  14. Maylong MN-1000P Screen Replacement: 14 단계, 이미지 1/2 Maylong MN-1000P Screen Replacement: 14 단계, 이미지 2/2
    • Flip the computer over.

    • Disconnect the red, green, black, and white intertwined wires from the connector to the motherboard.

  15. Maylong MN-1000P Screen Replacement: 15 단계, 이미지 1/3 Maylong MN-1000P Screen Replacement: 15 단계, 이미지 2/3 Maylong MN-1000P Screen Replacement: 15 단계, 이미지 3/3
    • Remove the black tape holding down the red, green, black, and white intertwined wires.

    • Remove the screen.

결론

To reassemble your device, follow these instructions in reverse order.

katelyn buckman

회원 가입일: 01/13/20

553 평판

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 114