주요 콘텐츠로 건너뛰기

소개

The tilting mechanism allows the Kinect to follow the player. It operates through a motor and several gears.

  1. Pull the rubber backing off the base of the Kinect.
    • Pull the rubber backing off the base of the Kinect.

    • If the adhesive attaching the rubber backing and the base doesn't come off with the rubber backing, remove the adhesive as well.

    • If the adhesive comes off separately, you may some type of adhesive to reattach the rubber backing.

  2. Unscrew the four 7mm T6 Torx screws. Pull off the base to reveal the inner case.
    • Unscrew the four 7mm T6 Torx screws.

    • Pull off the base to reveal the inner case.

  3. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    지금 장보기

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    지금 장보기
  4. Unscrew the four 5mm #0 Phillip screws. These screws strip easily. Remove the metal plate to reveal the motor and gears.
    • Unscrew the four 5mm #0 Phillip screws.

    • These screws strip easily.

    • Remove the metal plate to reveal the motor and gears.

    • Disconnect the connector to separate the plate from the Kinect.

  5. Remove the three gears on top of the motor, starting with the center gear.
    • Remove the three gears on top of the motor, starting with the center gear.

  6. Unscrew the four 5mm #00 Phillip screws. Remove the motor from the plate to replace.
    • Unscrew the four 5mm #00 Phillip screws.

    • Remove the motor from the plate to replace.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Daniel

회원 가입일: 2015년 04월 20일

233 평판

안내서 1개 작성함

Cal Poly, Team 14-7, Amido Spring 2015 Cal Poly, Team 14-7, Amido Spring 2015 회원

CPSU-AMIDO-S15S14G7

4 회원들

안내서 6개 작성하였습니다

Be careful not to lose the spring & washer ! ( It’s also missing a step showing where the brass washer goes )https://www.zdnet.com/pictures/microsoft...

Bantum Works - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 11

전체 시간: 2,506