주요 콘텐츠로 건너뛰기

소개

This guide will show you how to remove the back panel of the keyboard so that you can see the internals of the keyboard.

부품

지정된 부품이 없습니다.

  1. Flip the keyboard over so you can see the back panel.
    • Flip the keyboard over so you can see the back panel.

  2. Insert the plastic opening tool in the crevice between the panel and the keyboard. Apply some pressure and lift up so that the back panel is pried away from the keyboard.
    • Insert the plastic opening tool in the crevice between the panel and the keyboard.

    • Apply some pressure and lift up so that the back panel is pried away from the keyboard.

    • The panel is glued down on the inside so this may require some force to lift away the panel.

    • Continue to lift until the panel is completely separated from the keyboard.

    • The panel is still attached to the keyboard by a ribbon cable so only lift the panel a few inches.

  3. Lift the panel away with the ribbon cable still attached and set aside the panel so that you can work on other components.
    • Lift the panel away with the ribbon cable still attached and set aside the panel so that you can work on other components.

결론

To reassemble your device, follow these instructions in reverse order.

Natalie Weisenburger

회원 가입일: 2016년 10월 06일

579 평판

안내서 4개 작성하였습니다

Cal Poly, Team 20-3, Livingston Fall 2016 Cal Poly, Team 20-3, Livingston Fall 2016 회원

CPSU-LIVINGSTON-F16S20G3

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 176