소개
This video demonstrates how to replace the kickstand, SSD, Display, Surflink port assembly, thermal module (or heatsink), battery, volume and power buttons, speakers, Wi‑Fi deck, cameras, motherboard, and chassis in your Microsoft Surface 9 tablet.
Please refer to the official Microsoft Service Guide for step-by-step instructions.
Chapters
00:00 Introduction and Prerequisite Steps
Disassembly
01:26 Kickstand
02:24 rSSD
02:42 Display
05:36 Surflink
06:06 Thermal Module
07:04 Battery
07:35 Volume and Power Buttons
08:03 Speakers
08:17 Wi-Fi Deck
08:36 Front and Rear Cameras
09:01 Motherboard
09:31 Chassis
Reassembly
09:47 Chassis
09:58 Motherboard
10:22 Front and Rear Cameras
10:46 Wi-Fi Deck
11:05 Speakers
11:20 Volume and Power Buttons
11:42 Battery
12:39 Thermal Module
13:02 Surflink
13:18 Display
15:48 rSSD
16:02 Kickstand
필요한 것
동영상 지침
After your repair, test your Surface Pro with Microsoft's Surface Diagnostic Toolkit.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
다른 2명이 해당 안내서를 완성하였습니다.
팀
3가이드 댓글
where do we get the display adhesive and the speaker mesh?
@cashewclay
Mohamed B - 답글
Worked well for screen replacement, but guide advised removal of the speaker grills. New screen did not include new speaker grills :(
lane wilson - 답글
Thanks for the instructions. I was able to find some important information here that I was looking for.
frickelwerk - 답글