기기를 수리하세요 커뮤니티 상점

Midland X-tra Talk Radio LXT118 Speaker Replacement

소개

Looks as though some experience with a soldering tool may be necessary, so make sure to be safe with these steps!

필요한 것

  1. Midland X-tra Talk Radio LXT118 Speaker Replacement, Batteries: 1 단계, 이미지 1/2 Midland X-tra Talk Radio LXT118 Speaker Replacement, Batteries: 1 단계, 이미지 2/2

    • First, apply pressure with your thumb on the top of the battery cover.

    • Next, pull down on the cover until it begins to slide.

    편집

  2. Midland X-tra Talk Radio LXT118 Speaker Replacement: 2 단계, 이미지 1/1

    • Finally, once the cover is completely off, pry up the old batteries with your finger or a strong, skinny tool (i.e. spudger).

    편집

  3. Midland X-tra Talk Radio LXT118 Speaker Replacement, Case: 3 단계, 이미지 1/1

    • Unscrew the six 8.0 millimeter long, #0 screws on the backside of the case using the Phillips #0 screwdriver.

    편집

  4. Midland X-tra Talk Radio LXT118 Speaker Replacement: 4 단계, 이미지 1/1

    • Detach back part of the case by gently lifting up.

    편집

  6. Midland X-tra Talk Radio LXT118 Speaker Replacement, Speaker: 5 단계, 이미지 1/1

    • Remove the circuit board from the front part of the radio case.

    • Clip the red and black connecting wires at the base closest to the circuit bored in the spots denoted by the two red circles.

    편집

  7. Midland X-tra Talk Radio LXT118 Speaker Replacement: 6 단계, 이미지 1/1

    • Scrape off the glue on the outer lining of the speaker using the metal spudger.

    편집

  8. Midland X-tra Talk Radio LXT118 Speaker Replacement: 7 단계, 이미지 1/1

    • Pry the speaker from the case using the metal spudger.

    • This should not take excessive force, so make sure all remaining glue is scraped off from the edges if it will not easily come out.

    편집

  9. Midland X-tra Talk Radio LXT118 Speaker Replacement: 8 단계, 이미지 1/1

    • The speaker is now disassembled!

    편집

  10. Midland X-tra Talk Radio LXT118 Speaker Replacement, Speaker: 9 단계, 이미지 1/1

    • Solder the new wires to the circuit board in the spots denoted by the two red circles.

    편집

  11. Midland X-tra Talk Radio LXT118 Speaker Replacement: 10 단계, 이미지 1/1

    • Place the speaker back inside the shell casing in the same way that it was originally placed.

    • Accurately use a polyurethane glue around the rim of the speaker to mount it firmly back inside the plastic casing.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

James Tucker Dunn

회원 가입일: 01/18/13

371 평판

안내서 6개 작성하였습니다

배지: 14

배지 +11개 더

팀

Cal Poly, Team 19-43, Regan Winter 2013 Cal Poly, Team 19-43, Regan Winter 2013 회원

CPSU-REGAN-W13S19G43

3 회원들

안내서 9개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 758