주요 콘텐츠로 건너뛰기

Milwaukee Hex Impact Driver 2750-20 Output Shaft Bearing Replacement

필요한 것

  1. Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement, Outer Casing: 1 단계, 이미지 1/1
    • Remove the five T9 15.5 mm screws.

    • Remove the single T9 19.5mm screw.

    • Remove the two T9 37mm screws.

  2. Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement: 2 단계, 이미지 1/1
    • Remove the drill casing to expose the drill's interior parts.

  3. Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement, Output Shaft Bearing: 3 단계, 이미지 1/1
    • Once the interior is open locate the output shaft driver pictured at the left of the screen.

  4. Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement: 4 단계, 이미지 1/3 Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement: 4 단계, 이미지 2/3 Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement: 4 단계, 이미지 3/3
    • Lift the driver head and motor assembly directly out of the outer casing.

    • Pull the driver head away from the motor assembly, separating the two.

  5. Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement: 5 단계, 이미지 1/3 Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement: 5 단계, 이미지 2/3 Milwaukee Hex Impact Driver 2750-20  Output Shaft Bearing Replacement: 5 단계, 이미지 3/3
    이 단계에 사용된 도구:
    Tweezers
    $4.99
    구매
    • Remove the fan and the drive shaft assembly from the motor core assembly.

    • Using a pair of tweezers, remove the retaining ring.

    • Remove the old bearing and reinstall the new retaining clip.

결론

To reassemble your device, follow these instructions in reverse order.

Charles Putnam

회원 가입일: 02/12/19

409 평판

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 15

전체 시간: 619