기기를 수리하세요 커뮤니티 상점

Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement

소개

The following repair guide shows how to remove and replace the chuck drive shaft in a Milwaukee Hex Impact Driver 2750-20.

필요한 것

  1. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Outer Casing: 1 단계, 이미지 1/1

    • Remove the five T9 15.5 mm screws.

    • Remove the single T9 19.5mm screw.

    • Remove the two T9 37mm screws.

    편집

  2. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement: 2 단계, 이미지 1/1

    • Remove the drill casing to expose the drill's interior parts.

    편집

  4. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: 3 단계, 이미지 1/3 Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: 3 단계, 이미지 2/3 Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: 3 단계, 이미지 3/3

    • Pulling directly outward, remove the driver head from the motor assembly by picking it up out of the casing.

    편집

  5. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement: 4 단계, 이미지 1/1

    • Remove the drive shaft assembly from the motor coils.

    • There will be resistance when removing the drive shaft as there is magnetism working against you.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Charles Putnam

회원 가입일: 02/12/19

409 평판

안내서 5개 작성하였습니다

배지: 5

배지 +2개 더

팀

Western Carolina University, Team S1-G1, Virtue Spring 2019 Western Carolina University, Team S1-G1, Virtue Spring 2019 회원

WCU-VIRTUE-S19S1G1

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 11

전체 시간: 773