기기를 수리하세요 커뮤니티 상점

Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement

소개

The following repair guide shows how to remove and replace the directional switch in a Milwaukee Hex Impact Driver 2750-20.

필요한 것

  1. Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement, Outer Casing: 1 단계, 이미지 1/1

    • Remove the five T9 15.5 mm screws.

    • Remove the single T9 19.5mm screw.

    • Remove the two T9 37mm screws.

    번역하기

  3. Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement: 2 단계, 이미지 1/1

    • Remove the drill casing to expose the drill's interior parts.

    번역하기

  4. Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement, Directional Switch: 3 단계, 이미지 1/3 Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement, Directional Switch: 3 단계, 이미지 2/3 Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement, Directional Switch: 3 단계, 이미지 3/3
    이 단계에 사용된 도구:
    Tweezers
    $4.99
    구매

    • Remove the trigger assembly completely.

    • Remove the directional switch by lifting upward using a pair of tweezers, clearing the alignment pole on the trigger assembly.

    • Insert a new directional switch by aligning the hole on the switch with the pole on the trigger.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Charles Putnam

회원 가입일: 02/12/19

409 평판

안내서 5개 작성하였습니다

배지: 5

배지 +2개 더

팀

Western Carolina University, Team S1-G1, Virtue Spring 2019 Western Carolina University, Team S1-G1, Virtue Spring 2019 회원

WCU-VIRTUE-S19S1G1

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 11

전체 시간: 955