Milwaukee M12 2407-20 Outer Casing Replacement

소개

This guide will walk through the steps to remove the service housing set (outer casing) on the Milwaukee M12 2407-20.

Remove each of the seven 14mm Pan Hd. T-10 ST screws on one side of the housing assembly using the T10 screwdriver.

Remove metal clip located at the base of the drill, where the battery is to be inserted.
You may need to use a spudger if the clip is too difficult to remove with your fingers.

결승점

다른 2명이 해당 안내서를 완성하였습니다.

회원 가입일: 02/05/19

575 평판

안내서 4개 작성하였습니다

APSU-MENAGARISHVILI-S19S2G1

2 회원들

안내서 5개 작성하였습니다