기기를 수리하세요 커뮤니티 상점

Milwaukee M12 2407-20 Speed Selector Lever Replacement

소개

This guide will walk through the steps to replace the speed selector lever on the Milwaukee M12 2407-20.

필요한 것

  1. Milwaukee M12 2407-20 Speed Selector Lever Replacement, Outer Casing: 1 단계, 이미지 1/1

    • Remove each of the seven 14mm Pan Hd. T-10 ST screws on one side of the housing assembly using the T10 screwdriver.

    편집

  2. Milwaukee M12 2407-20 Speed Selector Lever Replacement: 2 단계, 이미지 1/1

    • Remove metal clip located at the base of the drill, where the battery is to be inserted.

    • You may need to use a spudger if the clip is too difficult to remove with your fingers.

    편집

  4. Milwaukee M12 2407-20 Speed Selector Lever Replacement, Speed Selector Lever: 3 단계, 이미지 1/3 Milwaukee M12 2407-20 Speed Selector Lever Replacement, Speed Selector Lever: 3 단계, 이미지 2/3 Milwaukee M12 2407-20 Speed Selector Lever Replacement, Speed Selector Lever: 3 단계, 이미지 3/3

    • Remove the unit from the housing assembly and set the housing assembly aside.

    편집

  5. Milwaukee M12 2407-20 Speed Selector Lever Replacement: 4 단계, 이미지 1/1

    • Use a spudger to pry the broken speed selector lever off the assembly.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Allison Schieber

회원 가입일: 02/05/19

575 평판

안내서 4개 작성하였습니다

배지: 9

배지 +6개 더

팀

Appalachian State University, Team S2-G1, Menagarishvili Spring 2019 Appalachian State University, Team S2-G1, Menagarishvili Spring 2019 회원

APSU-MENAGARISHVILI-S19S2G1

2 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 20

전체 시간: 1,562