기기를 수리하세요 커뮤니티 상점

Milwaukee M12 2457-20 Disassembly

소개

This guide will show you how to disassemble the Milwaukee M12 Cordless 3/8" Ratchet to access various parts for replacement or repairs.

필요한 것

  1. Milwaukee M12 2457-20 Disassembly, Housing: 1 단계, 이미지 1/2 Milwaukee M12 2457-20 Disassembly, Housing: 1 단계, 이미지 2/2

    • Unscrew the four M3 x 10 T-10 screws located on the neck.

    편집

  2. Milwaukee M12 2457-20 Disassembly: 2 단계, 이미지 1/2 Milwaukee M12 2457-20 Disassembly: 2 단계, 이미지 2/2

    • Remove the spring pin from the switch paddle and take off the switch paddle.

    편집

  4. Milwaukee M12 2457-20 Disassembly: 3 단계, 이미지 1/1

    • Unscrew the four M2.6 x 14 ST T-8 screws located on the body.

    • Unscrew the M2.6 x 10 ST T-8 screw located underneath the switch paddle.

    편집

  5. Milwaukee M12 2457-20 Disassembly: 4 단계, 이미지 1/2 Milwaukee M12 2457-20 Disassembly: 4 단계, 이미지 2/2

    • Separate the two housing parts of the tool.

    • Remove the 3/8" yoke assembly and the motor assembly from the tool housing.

    편집

  6. Milwaukee M12 2457-20 Disassembly: 5 단계, 이미지 1/2 Milwaukee M12 2457-20 Disassembly: 5 단계, 이미지 2/2

    • Remove the drive pin connecting the 3/8" yoke assembly and the motor assembly.

    • Remove the crankshaft, planet gears, carrier assembly, and ring gear from the motor assembly.

    • Be aware that these parts are lubricated with grease.

    편집

  7. Milwaukee M12 2457-20 Disassembly: 6 단계, 이미지 1/1

    • You have now successfully dismantled the device.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Peter Lizotte

회원 가입일: 10/25/19

183 평판

안내서 1개 작성함

배지: 3

팀

UMass Dartmouth, Team S1-G6, O'Connell Fall 2019 UMass Dartmouth, Team S1-G6, O'Connell Fall 2019 회원

UMASSD-O'CONNELL-F19S1G6

3 회원들

안내서 1개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 19

30일 전: 19

전체 시간: 76