Minolta QTsi Maxxum Lens Replacement - iFixit 수리 안내서

소개

Replace the back piece of glass so that your pictures will be clear of scratches and cracks.

필요한 것

1 단계 Lens

Minolta QTsi Maxxum Lens Replacement, Lens: 1 단계, 이미지 1/2

Minolta QTsi Maxxum Lens Replacement, Lens: 1 단계, 이미지 2/2

The lens release button is located on the right front side of the camera.
Remove the lens from the camera by pushing the lens release button.

2 단계

Minolta QTsi Maxxum Lens Replacement: 2 단계, 이미지 1/1

The detached module has multiple screws that must be removed in order to reach the lens.
Once detached, remove the (4) black Phillips #00 5mm screws from the outer rim of the module.
Next, remove the (2) remaining black Phillips #00 5mm screws.

3 단계

Minolta QTsi Maxxum Lens Replacement: 3 단계, 이미지 1/2

Minolta QTsi Maxxum Lens Replacement: 3 단계, 이미지 2/2

Once all screws have been removed, take the back piece off of the lens and replace it.
This piece should come off easily without using any tools.
There is film underneath the last 2 screws that are removed so be careful when taking it out because it could rip.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Jordan Ellery

회원 가입일: 10/10/16

388 평판

안내서 3개 작성하였습니다

배지 +6개 더

팀

Sam Houston State, Team 12-4, Blackburne Fall 2016 Sam Houston State, Team 12-4, Blackburne Fall 2016 회원

SHSU-BLACKBURNE-F16S12G4

4 회원들

안내서 5개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 1

7일 전: 7

30일 전: 17

전체 시간: 592