소개

This short, simple guide will help you replace the rubber keyboard buttons on a Mitsubishi T200 cellphone.

  1. Begin disassembling the phone by removing the back of the phone and the battery.
    • Begin disassembling the phone by removing the back of the phone and the battery.

  2. Remove the back plate by removing the 4 screws in the back plate using an appropriately sized Philips screwdriver
    • Remove the back plate by removing the 4 screws in the back plate using an appropriately sized Philips screwdriver

  3. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Pry the font plastic component from the “motherboard” component.
    • Pry the font plastic component from the “motherboard” component.

  5. Take out the old rubber keypad and replace with a new one.
    • Take out the old rubber keypad and replace with a new one.

  6. Reassemble by following previous steps in reverse order.
    • Reassemble by following previous steps in reverse order.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Katherine

회원 가입일: 2014년 02월 13일

22 평판

안내서 1개 작성함

Ohio State, Team 1-5, Meza Spring 2014 Ohio State, Team 1-5, Meza Spring 2014 회원

OSU-MEZA-S14S1G5

4 회원들

안내서 4개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 505