주요 콘텐츠로 건너뛰기

Mitsubishi WD57734 Back Panel Replacement

필요한 것

  1. Mitsubishi WD57734 Back Panel Replacement, Lamp: 1 단계, 이미지 1/1
    • Before disassembling your television, be sure it is powered off and unplugged.

    • Remove the single 18 mm Phillips #1 screw on the lamp access panel.

  2. Mitsubishi WD57734 Back Panel Replacement: 2 단계, 이미지 1/1
    • Pull the lamp access panel off of the back panel of the television by pulling straight back on the left side of the panel near the screw then pulling to the left.

  3. Mitsubishi WD57734 Back Panel Replacement: 3 단계, 이미지 1/1
    • Loosen the two Phillips #2 screws securing the lamp housing to the television until the screws will swivel vertically.

    • These two screws are permanently attached to the lamp housing and cannot be removed completely.

  4. Mitsubishi WD57734 Back Panel Replacement: 4 단계, 이미지 1/1
    • Using the handle, pull the lamp housing straight back out of the television.

    • Do not touch the glass of the lamp with your bare hands. The oil from your fingers can distort the TV image and lead to other issues.

  5. Mitsubishi WD57734 Back Panel Replacement, Back Panel: 5 단계, 이미지 1/2 Mitsubishi WD57734 Back Panel Replacement, Back Panel: 5 단계, 이미지 2/2
    • Remove the following 8 Phillips #1 screws:

    • One 22 mm Phillips #1 in the bottom right corner of the back panel.

    • One 18 mm Phillips #1 in the top middle of the back panel.

    • Six 18 mm Phillips #1 in the rest of the back panel.

  6. Mitsubishi WD57734 Back Panel Replacement: 6 단계, 이미지 1/1
    • Pull the back panel off of the television by gripping the sides and rotating it down.

결론

To reassemble your device, follow these instructions in reverse order.

Herman Chai

회원 가입일: 10/02/12

196 평판

안내서 3개 작성하였습니다

Cal Poly, Team 18-39, Regan Fall 2012 Cal Poly, Team 18-39, Regan Fall 2012 회원

CPSU-REGAN-F12S18G39

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 1,029