주요 콘텐츠로 건너뛰기

소개

How to remove the cutting head's blade cover for replacement or further device service for the Mk Diamond Wet Saw MK660 2010.

도구

지정된 도구가 없습니다.

  1. Mk Diamond Wet Saws MK660 2010 Blade Cover Replacement, Blade Cover: 1 단계, 이미지 1/3 Mk Diamond Wet Saws MK660 2010 Blade Cover Replacement, Blade Cover: 1 단계, 이미지 2/3 Mk Diamond Wet Saws MK660 2010 Blade Cover Replacement, Blade Cover: 1 단계, 이미지 3/3
    • Before you begin, make sure to power off and unplug the device from the outlet.

    • If the clear water pump hose is connected, remove it now.

    • Loosen the plastic knob holding the saw's cutting head in place.

    • Lower the cutting head while keeping it steady.

  2. Mk Diamond Wet Saws MK660 2010 Blade Cover Replacement: 2 단계, 이미지 1/2 Mk Diamond Wet Saws MK660 2010 Blade Cover Replacement: 2 단계, 이미지 2/2
    • Unscrew the knob.

    • Remove it from the cutting head.

  3. Mk Diamond Wet Saws MK660 2010 Blade Cover Replacement: 3 단계, 이미지 1/2 Mk Diamond Wet Saws MK660 2010 Blade Cover Replacement: 3 단계, 이미지 2/2
    • Loosen the plastic knob holding the blade cover in place.

  4. Mk Diamond Wet Saws MK660 2010 Blade Cover Replacement: 4 단계, 이미지 1/3 Mk Diamond Wet Saws MK660 2010 Blade Cover Replacement: 4 단계, 이미지 2/3 Mk Diamond Wet Saws MK660 2010 Blade Cover Replacement: 4 단계, 이미지 3/3
    • Loosen the wing nut on the blade cover pivot shaft.

    • Remove the wing nut and accompanying washer.

  5. Mk Diamond Wet Saws MK660 2010 Blade Cover Replacement: 5 단계, 이미지 1/2 Mk Diamond Wet Saws MK660 2010 Blade Cover Replacement: 5 단계, 이미지 2/2
    • Pivot the blade cover up and pull it off the shaft.

결론

To reassemble your device, follow these instructions in reverse order.

Carsten Frauenheim

회원 가입일: 2020년 03월 10일

73,911 평판

안내서 330개 작성하였습니다

iFixit iFixit 회원

Community

145 회원들

안내서 15,517개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 32