기기를 수리하세요 커뮤니티 상점

Modal MD-SPBT01 Speaker Wiring Replacement

소개

We will be opening up the speaker and replacing the wiring so the sound will work again.

필요한 것

  1. Modal MD-SPBT01 Speaker Wiring Replacement, Speaker Wiring: 1 단계, 이미지 1/2 Modal MD-SPBT01 Speaker Wiring Replacement, Speaker Wiring: 1 단계, 이미지 2/2

    • Use the plastic opening tool to pull the metal cover off the top of the speaker.

    번역하기

  2. Modal MD-SPBT01 Speaker Wiring Replacement: 2 단계, 이미지 1/1

    • Remove the four screws that are inside the holes on the top of the speaker.

    • Use a Phillips 00 screwdriver to remove the 10mm screws.

    번역하기

  4. Modal MD-SPBT01 Speaker Wiring Replacement: 3 단계, 이미지 1/1

    • Pull the top piece of the speaker off to allow access to the interior.

    번역하기

  5. Modal MD-SPBT01 Speaker Wiring Replacement: 4 단계, 이미지 1/1

    • Locate the speaker wire connection and remove the wiring.

    • Locate the LED lighting wire and remove that as well.

    번역하기

  6. Modal MD-SPBT01 Speaker Wiring Replacement: 5 단계, 이미지 1/1

    • Once you disconnect the wires, you can remove the speaker.

    번역하기

  7. Modal MD-SPBT01 Speaker Wiring Replacement: 6 단계, 이미지 1/2 Modal MD-SPBT01 Speaker Wiring Replacement: 6 단계, 이미지 2/2

    • Remove the positive and negative connections for the wiring to fully disconnect the wire.

    • Now that you have removed the defective wiring, you can install a new one.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 1명과 함께

Nathan Hall

회원 가입일: 10/13/15

258 평판

안내서 2개 작성하였습니다

배지: 12

배지 +9개 더

팀

Sam Houston State, Team 2-4, Blackburne Fall 2015 Sam Houston State, Team 2-4, Blackburne Fall 2015 회원

SHSU-BLACKBURNE-F15S2G4

3 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 3

30일 전: 7

전체 시간: 495