주요 콘텐츠로 건너뛰기

Monster SoundStage S1 Mini Speaker Replacement

필요한 것

  1. Monster SoundStage S1 Mini Speaker Replacement, Speaker: 1 단계, 이미지 1/2 Monster SoundStage S1 Mini Speaker Replacement, Speaker: 1 단계, 이미지 2/2
    • Remove the speaker wires from the motherboard by pinching the plastic tab at the end of the cable and pulling towards you.

  2. Monster SoundStage S1 Mini Speaker Replacement: 2 단계, 이미지 1/2 Monster SoundStage S1 Mini Speaker Replacement: 2 단계, 이미지 2/2
    • Unscrew 1.2 cm Torx security screw, holding the silver circle connector, to disconnect the wire from the speakerboard to the motherboard

  3. Monster SoundStage S1 Mini Speaker Replacement: 3 단계, 이미지 1/1
    • Remove the black putty from the speaker wires at both ends of the speaker board.

  4. Monster SoundStage S1 Mini Speaker Replacement: 4 단계, 이미지 1/3 Monster SoundStage S1 Mini Speaker Replacement: 4 단계, 이미지 2/3 Monster SoundStage S1 Mini Speaker Replacement: 4 단계, 이미지 3/3
    • Solder the black plastic encasing the red and black wires.

  5. Monster SoundStage S1 Mini Speaker Replacement: 5 단계, 이미지 1/2 Monster SoundStage S1 Mini Speaker Replacement: 5 단계, 이미지 2/2
    • Remove both the black and red wires with pliers

    • Pliers may stick to speaker because it is magnetic.

  6. Monster SoundStage S1 Mini Speaker Replacement: 6 단계, 이미지 1/2 Monster SoundStage S1 Mini Speaker Replacement: 6 단계, 이미지 2/2
    • Tuck wires through the hole where the speaker is located, then gently push the speaker out.

    • The 1.2 cm Torx security screws that stayed in place near the speaker will now fall out.

    • To remove the other speaker repeat steps 3-6

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Heather Carrillo

회원 가입일: 09/12/16

412 평판

안내서 2개 작성하였습니다

CSU Fullerton, Team 2-6, Bruce Fall 2016 CSU Fullerton, Team 2-6, Bruce Fall 2016 회원

CSUF-BRUCE-F16S2G6

4 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 8

전체 시간: 491