소개
The floor brush is the cylindrical brush on the bottom of the Moosoo XL-618A vacuum. The floor brush is what picks up the dirt and debris on the floor when vacuuming. It also keeps the air floor close to the ground so not dust gets further up in the air. Here is a guide to replace the floor brush.
필요한 것
-
-
Remove the eight 11 mm screws on the bottom of the vacuum with the Phillips #1 screwdriver.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
팀
Utah Tech University, Team 1-1, McMurrin Fall 2023 Utah Tech University, Team 1-1, McMurrin Fall 2023 회원
UTAHTECH-MCMURRIN-F23S1G1
4 회원들
안내서 7개 작성하였습니다
