주요 콘텐츠로 건너뛰기

소개

The glass covering on mobile devices can be prone to damage and constant wear and tear. The Motorola Adventure V750 has a very moderate process in replacing the front protection screen.

부품

지정된 부품이 없습니다.

    • Remove the back cover and battery of the Motorola Adventure V750.

    • Using a screwdriver, remove the four screws that are visible.

    • After removing the battery chamber, unclip one of the ribbons that connect the screen to the main body of the phone. This divides the phone in half.

    • Remove the two screws located at the bottom of the main display.

    • Remove the display screen by sliding a sharp object or fingernail along the edge of the housing.

    • Release the display up to the point where you see two metal parts (left and right of the Motorola text). The top part of the display is held on with double-sided tape.

    • Gently unstick the tape and remove the display. Be careful not to bend this part.

    • Carefully install the new glass.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Kyle

회원 가입일: 2012년 10월 01일

590 평판

안내서 4개 작성하였습니다

University of Maine, Team 1-2, Diaz Fall 2012 University of Maine, Team 1-2, Diaz Fall 2012 회원

UMAINE-DIAZ-F12S1G2

3 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 623