기기를 수리하세요 커뮤니티 상점

Motorola Droid RAZR Maxx Metal Chassis Replacement

소개

To reach all the important parts of the phone such as the motherboard and the LCD screen you must remove this metal contraption.

필요한 것

  1. Motorola Droid RAZR Maxx Metal Chassis Replacement, Metal Chassis: 1 단계, 이미지 1/2 Motorola Droid RAZR Maxx Metal Chassis Replacement, Metal Chassis: 1 단계, 이미지 2/2

    • Remove the SIM card.

    • Remove the microSD card.

    • Insert the plastic opening tool between the back cover and the front piece of the case, freeing the plastic clips between the phone.

    • Do this along the back right side of the phone cover until you reach the top.

    편집

  2. Motorola Droid RAZR Maxx Metal Chassis Replacement: 2 단계, 이미지 1/2 Motorola Droid RAZR Maxx Metal Chassis Replacement: 2 단계, 이미지 2/2

    • Use the plastic opening tool to carefully work your way around the top of the phone, freeing the plastic clips.

    • Be cautious when using the tool around the top of the device because the plastic case is very thin and could easily be cracked or snapped.

    • After this continue using the tool and pry down the remaining side and the bottom of the phone.

    편집

  3. Motorola Droid RAZR Maxx Metal Chassis Replacement: 3 단계, 이미지 1/3 Motorola Droid RAZR Maxx Metal Chassis Replacement: 3 단계, 이미지 2/3 Motorola Droid RAZR Maxx Metal Chassis Replacement: 3 단계, 이미지 3/3

    • With all the plastic clips released, pull away the back cover from the phone to remove it.

    • The back cover is attached to the battery with a large amount of adhesive. Some force may be required to pull the back cover from the phone.

    • The back cover is very durable and will not break from some bending or pulling.

    편집

  5. Motorola Droid RAZR Maxx Metal Chassis Replacement: 4 단계, 이미지 1/1

    • Looking at the top rectangular hump where the camera is located, you will now use the plastic opening tool to remove the camera cover.

    • With the plastic opening tool, apply pressure into any surrounding crease of the camera cover to remove it.

    편집

  6. Motorola Droid RAZR Maxx Metal Chassis Replacement: 5 단계, 이미지 1/3 Motorola Droid RAZR Maxx Metal Chassis Replacement: 5 단계, 이미지 2/3 Motorola Droid RAZR Maxx Metal Chassis Replacement: 5 단계, 이미지 3/3

    • Using the T5 and T4 bit pieces, remove the silver screws located around the rear case of the phone.

    • Remove the three 6.7 mm silver T4 screws that are located at the top of the phone.

    • Remove the five 4.0 mm silver T5 screws that are located near the middle of the phone.

    편집

  7. Motorola Droid RAZR Maxx Metal Chassis Replacement: 6 단계, 이미지 1/1

    • Using the T4 bit piece remove the three black 4.5 mm screws that are located at the bottom of the phone.

    편집

  8. Motorola Droid RAZR Maxx Metal Chassis Replacement: 7 단계, 이미지 1/3 Motorola Droid RAZR Maxx Metal Chassis Replacement: 7 단계, 이미지 2/3 Motorola Droid RAZR Maxx Metal Chassis Replacement: 7 단계, 이미지 3/3

    • Insert the plastic opening tool between the rear case and motherboard assembly.

    • Using the plastic opening tool, carefully work your way around the phone, freeing the plastic clips.

    • Carefully pull the rear case off the motherboard assembly.

    편집

  9. Motorola Droid RAZR Maxx Metal Chassis Replacement: 8 단계, 이미지 1/2 Motorola Droid RAZR Maxx Metal Chassis Replacement: 8 단계, 이미지 2/2

    • Using the tip of the spudger, lift the red silicone cover off the battery terminal screws.

    • Remove the two 3.3mm T5 Torx battery terminal screws.

    • Grab the red battery removal tab and pull the battery out.

    • There might be some adhesive between the battery and motherboard assembly.

    편집

  10. Motorola Droid RAZR Maxx Metal Chassis Replacement: 9 단계, 이미지 1/2 Motorola Droid RAZR Maxx Metal Chassis Replacement: 9 단계, 이미지 2/2

    • Using the T5 bit pieces, remove the silver screws located around the metal chassis.

    • Remove the three 3.5 mm silver T5 screws that are located near the middle of the phone.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Nick Kraese

회원 가입일: 10/08/14

657 평판

안내서 2개 작성하였습니다

배지: 8

배지 +5개 더

팀

USF Tampa, Team 14-6, Leahy Fall 2014 USF Tampa, Team 14-6, Leahy Fall 2014 회원

USFT-LEAHY-F14S14G6

4 회원들

안내서 10개 작성하였습니다

댓글 한 개

Where are the replacement chassis parts for this phone??? Thanks Joey K

sailorjt1985 - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,722