기기를 수리하세요 커뮤니티 상점

Motorola Edge (2022) Camera Bezel Replacement

소개

Use this guide to replace the camera bezel on your Motorola Edge (2022).

You'll need replacement adhesive in order to complete this repair.

필요한 것

  1. Motorola Edge (2022) Camera Bezel Replacement, Heat the right edge: 1 단계, 이미지 1/1

    • Heat an iOpener and apply it to the back cover's right edge for two minutes.

    • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the display and internal battery are both susceptible to heat damage.

    번역하기

  2. Motorola Edge (2022) Camera Bezel Replacement, Insert an opening pick: 2 단계, 이미지 1/2 Motorola Edge (2022) Camera Bezel Replacement, Insert an opening pick: 2 단계, 이미지 2/2

    • Insert an opening pick between the camera bezel and the back cover.

    번역하기

  4. Motorola Edge (2022) Camera Bezel Replacement, Slice the camera bezel adhesive: 3 단계, 이미지 1/2 Motorola Edge (2022) Camera Bezel Replacement, Slice the camera bezel adhesive: 3 단계, 이미지 2/2

    • Slide the pick around the perimeter of the camera bezel to slice all the adhesive securing the bezel.

    • You may have to repeat this process multiple times to completely cut all of the adhesive.

    번역하기

  5. Motorola Edge (2022) Camera Bezel Replacement, Remove the camera bezel: 4 단계, 이미지 1/2 Motorola Edge (2022) Camera Bezel Replacement, Remove the camera bezel: 4 단계, 이미지 2/2

    • Lift the camera bezel away from the phone and remove it.

    번역하기
결론

To reassemble your device, follow the instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Check out our Answers community for troubleshooting help.

작성자

다른 기여자 4명과 함께

Spencer Day

회원 가입일: 09/14/22

55,203 평판

안내서 408개 작성하였습니다

배지: 34

배지 +31개 더

팀

iFixit iFixit 회원

Staff

136 회원들

안내서 17,430개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 3

30일 전: 11

전체 시간: 337