주요 콘텐츠로 건너뛰기

Motorola MBP667CONNECT Camera Stand Replacement

필요한 것

  1. Motorola MBP667CONNECT Camera Stand Replacement, Camera Stand: 1 단계, 이미지 1/2 Motorola MBP667CONNECT Camera Stand Replacement, Camera Stand: 1 단계, 이미지 2/2
    • Remove two 5 mm Phillips #1 screws from the bottom of the camera stand.

  2. Motorola MBP667CONNECT Camera Stand Replacement: 2 단계, 이미지 1/1
    • Use a nylon spudger to remove the casing.

  3. Motorola MBP667CONNECT Camera Stand Replacement: 3 단계, 이미지 1/1
    • Remove the two 5 mm Phillips #1 screws attached to the black plastic under the casing.

  4. Motorola MBP667CONNECT Camera Stand Replacement: 4 단계, 이미지 1/2 Motorola MBP667CONNECT Camera Stand Replacement: 4 단계, 이미지 2/2
    • Remove the black circular plastic part.

  5. Motorola MBP667CONNECT Camera Stand Replacement: 5 단계, 이미지 1/1
    • Remove the white plastic wire housing beneath the black plastic.

  6. Motorola MBP667CONNECT Camera Stand Replacement: 6 단계, 이미지 1/2 Motorola MBP667CONNECT Camera Stand Replacement: 6 단계, 이미지 2/2
    • Now, remove the bottom of the stand by pulling it from the camera.

결론

To reassemble your device, follow these instructions in reverse order.

Anne Ngo

회원 가입일: 01/16/19

183 평판

안내서 1개 작성함

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 552