Motorola Moto 360 Wrist Strap Replacement - iFixit 수리 안내서

소개

Changing the wrist strap may be easier if the rear cover is taken off first, but removing the rear cover is not required and risks damage to the rear of your device.

필요한 것

1 단계 Wrist Strap

Motorola Moto 360 Wrist Strap Replacement, Wrist Strap: 1 단계, 이미지 1/1

Locate the spring-loaded pin that attaches the wrist strap to the watch.
There is a tiny groove on the end of the pin. This is where you will place the tweezers.

2 단계

Motorola Moto 360 Wrist Strap Replacement: 2 단계, 이미지 1/1

Take care not to lose the spring-loaded pin when removing the strap.
Use the tweezers to compress the spring-loaded pin so the strap can be removed.

3 단계

Motorola Moto 360 Wrist Strap Replacement: 3 단계, 이미지 1/2

Motorola Moto 360 Wrist Strap Replacement: 3 단계, 이미지 2/2

Pull the wristband away from the watch face.

결론

To reassemble your device, follow these instructions in reverse order.

다른 12명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Steven Tan

회원 가입일: 01/30/15

311 평판

안내서 1개 작성함

배지 +4개 더

팀

Cal Poly, Team 17-32, Amido Winter 2015 Cal Poly, Team 17-32, Amido Winter 2015 회원

CPSU-AMIDO-W15S17G32

4 회원들

안내서 18개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 2

7일 전: 5

30일 전: 13

전체 시간: 3,964