기기를 수리하세요 커뮤니티 상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Motorola Moto G XT1034 Back Case and Battery Cover Disassembly

필요한 것

  1. Motorola Moto G XT1034 Back Case and Battery Cover Disassembly, Rear Panel: 1 단계, 이미지 1/3 Motorola Moto G XT1034 Back Case and Battery Cover Disassembly, Rear Panel: 1 단계, 이미지 2/3 Motorola Moto G XT1034 Back Case and Battery Cover Disassembly, Rear Panel: 1 단계, 이미지 3/3

    • Before you start following any of the steps of this guide, completely turn the device off.

    • Take the plastic back cover off by either using a plastic Pry tool or simply using your hands. Start from the bottom by the charging port

    번역하기

  3. Motorola Moto G XT1034 Back Case and Battery Cover Disassembly, Removing the Screws: 2 단계, 이미지 1/1

    • Unscrew the 3.5mm screws, total of 14, located on the back protective cover by using a T5 Torx screwdriver.

    번역하기

  4. Motorola Moto G XT1034 Back Case and Battery Cover Disassembly, Removing the Battery Cover: 3 단계, 이미지 1/2 Motorola Moto G XT1034 Back Case and Battery Cover Disassembly, Removing the Battery Cover: 3 단계, 이미지 2/2

    • Use a plastic opening tool to remove the protective cover.

    • Carefully work the plastic tool around all the edges of the phone.

    • The protective cover holds the Volume and the Home buttons which might fall off the assembly when the cover is removed.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 7명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Radostin Lobodov

회원 가입일: 10/16/14

2,904 평판

안내서 6개 작성하였습니다

배지: 13

배지 +10개 더

팀

UMass Dartmouth, Team 5-7, Vijaybhaskar Fall 2014 UMass Dartmouth, Team 5-7, Vijaybhaskar Fall 2014 회원

UMASSD-VIJAYBHASKAR-F14S5G7

3 회원들

안내서 8개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 1,671