주요 콘텐츠로 건너뛰기

소개

If you have a cracked or damaged lens then it's best to replace it so your photos are crystal clear again. Follow this guide to do it yourself!

부품

  1. Place your thumb in the indent located at bottom left corner of the back cover. The cover will pop up and begin to lift
    • Place your thumb in the indent located at bottom left corner of the back cover.

    • The cover will pop up and begin to lift

    • Continue to slide your fingers up the sides to remove the back cover

  2. Remove the gray plastic surrounding the camera lens with a pair of tweezers. There will be a lot of glue and you may have to pull  hard on the plastic piece
    • Remove the gray plastic surrounding the camera lens with a pair of tweezers.

    • There will be a lot of glue and you may have to pull hard on the plastic piece

  3. Slide a pair of tweezers under and around the lens to loosen it. Pulls the lens towards you to remove.
    • Slide a pair of tweezers under and around the lens to loosen it.

    • Pulls the lens towards you to remove.

    • There will be glue under the lens. You may have to pull hard to remove the lens

결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

Kierra Schau

회원 가입일: 2017년 09월 28일

1,430 평판

안내서 4개 작성하였습니다

USF Tampa, Team S11-G2, Passmore Fall 2017 USF Tampa, Team S11-G2, Passmore Fall 2017 회원

USFT-PASSMORE-F17S11G2

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 18

전체 시간: 1,573