Motorola Moto G7 Play Camera Replacement

소개

This guide will show users how to replace a defective or damaged rear camera lens in the Motorola Moto G7 Play. This guide applies to both the XT1952-3 and XT1952-2 models. The rear camera lens is capable of taking 13MP photos as well as 1080p video. Users may need to replace the camera if the lens is badly damaged. A damaged lens affects photo quality in the camera.

Before you begin, download the Rescue and Smart Assistant app to backup your device and diagnose whether your problem is software or hardware related.

필요한 것

1 단계 Back Cover

Motorola Moto G7 Play Camera Replacement, Back Cover: 1 단계, 이미지 1/2

Motorola Moto G7 Play Camera Replacement, Back Cover: 1 단계, 이미지 2/2

Turn off your device before you begin.
Use the iFixit pick to break the adhesive around the back case.
Use a heat gun, hairdryer, or iOpener to weaken the adhesive around the back case. If you're using the iOpener, please review the instructions for proper use.

번역하기

2 단계

Detach the back case from the phone.
Make sure the back is opened right to left so the cable of the fingerprint scanner does not get damaged.

번역하기

3 단계

Use the iFixit pick and the iFixit opening tool to pull the fingerprint scanner off of the back case.

번역하기

4 단계 Camera

Motorola Moto G7 Play Camera Replacement, Camera: 4 단계, 이미지 1/1

Remove the nine 3.2mm screws from the motherboard cover with a Phillips #00 screwdriver.

번역하기

5 단계

Lift the motherboard cover from the bottom.
Use reverse tweezers or a similar tool if needed.

번역하기

6 단계

Once the motherboard cover is removed, use the iFixit opening tool to disconnect the ribbon cable connecting the camera to the motherboard.
The camera can now be removed and is ready to be replaced.

번역하기