주요 콘텐츠로 건너뛰기
  1. Remove SIM card tray. Remove SIM card tray. Remove SIM card tray.
    • Remove SIM card tray.

  2. Use the eject pin to open a gap and place a guitar pick into the gap. Use the eject pin to open a gap and place a guitar pick into the gap.
    • Use the eject pin to open a gap and place a guitar pick into the gap.

  3. Slide the guitar pick to cut the adhesive sticker and peel off the soft back cover. Slide the guitar pick to cut the adhesive sticker and peel off the soft back cover.
    • Slide the guitar pick to cut the adhesive sticker and peel off the soft back cover.

  4. Twist off three screws, pry up the securing bracket and remove the logo finally. Twist off three screws, pry up the securing bracket and remove the logo finally. Twist off three screws, pry up the securing bracket and remove the logo finally.
    • Twist off three screws, pry up the securing bracket and remove the logo finally.

결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

Sophia

회원 가입일: 2014년 03월 25일

43,398 평판

안내서 62개 작성하였습니다

댓글 2개

So apparently, this phone was supposed to have a fingerprint scanner. To anyone who has done this repair, I'm sure you're as confused as me as to why there is a flex cable leading to the "M" logo with nothing attached. My though is that's where the scanner was going to go, and it just never happened, which also explains why the iconic Motorola M dimple is a separate part, compared to the old Moto X and the Gs and Es, which was part of the back plastic cover.

Jeff Caauwe - 답글

Where can you get the replacement part? I'm finding it difficult.

Niall Murray - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 2,368