주요 콘텐츠로 건너뛰기
  1. Remove SIM card tray. Remove SIM card tray. Remove SIM card tray.
    • Remove SIM card tray.

  2. Remove back cover. Remove back cover. Remove back cover.
    • Remove back cover.

  3. Remove those two rubber cover. Remove those two rubber cover.
    • Remove those two rubber cover.

  4. Release power connecting flex connector and battery connector. Release power connecting flex connector and battery connector.
    • Release power connecting flex connector and battery connector.

  5. Twist off all 18 black torx screws and remove the middle housing from front assembly. Twist off all 18 black torx screws and remove the middle housing from front assembly.
    • Twist off all 18 black torx screws and remove the middle housing from front assembly.

  6. Release power flex connector from connecting flex. Release power flex connector from connecting flex.
    • Release power flex connector from connecting flex.

  7. Remove securing bracket and side buttons. Remove securing bracket and side buttons. Remove securing bracket and side buttons.
    • Remove securing bracket and side buttons.

  8. Pry up and remove the power flex.
    • Pry up and remove the power flex.

결론

To reassemble your device, follow these instructions in reverse order.

다른 10명이 해당 안내서를 완성하였습니다.

Sophia

회원 가입일: 2014년 03월 25일

43,398 평판

안내서 62개 작성하였습니다

댓글 3개

Followed your instructions. Volume works, power button still no go.

It clicks fine, but nothing happens..

Carlo Petermann - 답글

I have the same issue. Any ideas? Resolutions?

sagar bhale -

The screwdriver is T4 on my european moto X 2014, not T3!!

Clément Masci - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 6

전체 시간: 4,852