소개

Being able to access the LCD display of your Motorola Q Global is important if you wish to do self-maintenance. Here, we show you how to do so.

부품

부품은 필요하지 않습니다.

Turn the phone face down.
  • Turn the phone face down.

  • Press and hold the release button in the middle of the back panel.

  • Slide the bottom panel down to remove.

댓글 쓰기

Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown. When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.
  • Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown.

  • When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.

댓글 쓰기

Press inwardly on the upper casing to release.
  • Press inwardly on the upper casing to release.

댓글 쓰기

Slide the upper case rightward and lift up.
  • Slide the upper case rightward and lift up.

  • Lift the camera sticker so that it does not get damaged.

댓글 쓰기

Remove the 6 screws using the T5 torx screwdriver. Remove the 6 screws using the T5 torx screwdriver.
  • Remove the 6 screws using the T5 torx screwdriver.

댓글 쓰기

Once the screws are removed, use the plastic opening tool to remove the black casing.
  • Once the screws are removed, use the plastic opening tool to remove the black casing.

댓글 쓰기

Remove both screws on the mounted surface with a T5 screwdriver. Remove both screws on the mounted surface with a T5 screwdriver.
  • Remove both screws on the mounted surface with a T5 screwdriver.

댓글 쓰기

Remove the glued, mounted surface by lifting it from underneath the SIM card slot by using the plastic opening tool. Remove the glued, mounted surface by lifting it from underneath the SIM card slot by using the plastic opening tool.
  • Remove the glued, mounted surface by lifting it from underneath the SIM card slot by using the plastic opening tool.

댓글 쓰기

Lift the motherboard about 90 degrees and remove the circuit with the orange ribbon (from the keyboard) by gently lifting the circuit. Lift the motherboard about 90 degrees and remove the circuit with the orange ribbon (from the keyboard) by gently lifting the circuit.
  • Lift the motherboard about 90 degrees and remove the circuit with the orange ribbon (from the keyboard) by gently lifting the circuit.

댓글 쓰기

Separate the front plate from the circuit board. The LCD screen is attached to the circuit board by a thin ribbon.
  • Separate the front plate from the circuit board.

  • The LCD screen is attached to the circuit board by a thin ribbon.

  • Switch the lock on top of the circuit entry from horizontal to vertical.

댓글 쓰기

Insert the new LCD screen into the circuit.
  • Insert the new LCD screen into the circuit.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Will Dickman

회원 가입일: 2012년 09월 27일

28 평판

안내서 3개 작성하였습니다

Cal Poly, Team 6-31, Regan Fall 2012 Cal Poly, Team 6-31, Regan Fall 2012 회원

CPSU-REGAN-F12S6G31

5 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 712