소개
Use this repair guide to replace the back housing in a Motorola RAZR2 v9m.
필요한 것
-
-
-
Gently press the pointy end of the spudger into the edge of the bumper until it bows and separates from the phone.
-
Grab the bowed portion of bumper. Gently lift and peel the bumper away from the phone.
-
-
-
Remove the two 4-mm T5 Torx screws, previously hidden beneath the flip stop bumper pad.
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.
다른 2명이 해당 안내서를 완성하였습니다.