기기를 수리하세요 커뮤니티 상점

Motorola RIZR Z3 Motherboard Replacement

소개

Guide to replacing your phone's motherboard.

필요한 것

  1. Motorola RIZR Z3 Motherboard Replacement, Battery: 1 단계, 이미지 1/2 Motorola RIZR Z3 Motherboard Replacement, Battery: 1 단계, 이미지 2/2

    • Press the panel release button on the top of the phone and simultaneously pull the rear panel away from the phone.

    편집

  2. Motorola RIZR Z3 Motherboard Replacement: 2 단계, 이미지 1/2 Motorola RIZR Z3 Motherboard Replacement: 2 단계, 이미지 2/2

    • Tilt the battery by lifting at the exposed notch.

    • Slide the battery out of its casing.

    편집

  3. Motorola RIZR Z3 Motherboard Replacement, Motherboard: 3 단계, 이미지 1/1

    • Use a T4 screwdriver to unscrew all six of the .216 inch screws that attach the housing to the case.

    편집

  5. Motorola RIZR Z3 Motherboard Replacement: 4 단계, 이미지 1/2 Motorola RIZR Z3 Motherboard Replacement: 4 단계, 이미지 2/2

    • Use a plastic opening tool to lift the plastic casing.

    • Pull the plastic casing directly away from the phone.

    편집

  6. Motorola RIZR Z3 Motherboard Replacement: 5 단계, 이미지 1/1

    • Lift the black rubber loudspeaker housing up and out of the plastic casing.

    편집

  7. Motorola RIZR Z3 Motherboard Replacement: 6 단계, 이미지 1/2 Motorola RIZR Z3 Motherboard Replacement: 6 단계, 이미지 2/2

    • Use a plastic opening tool to gently lift up the SIM card reader, located above the rubber antenna casing. You should hear a click as it releases.

    • Caution: Remove carefully, if broken, the phone will not be able to make calls.

    편집

  8. Motorola RIZR Z3 Motherboard Replacement: 7 단계, 이미지 1/2 Motorola RIZR Z3 Motherboard Replacement: 7 단계, 이미지 2/2

    • Use a plastic opening tool to pry the two ribbon cable connectors, unclipping them from their sockets on the motherboard.

    • Caution: Remove carefully, if broken, the phone will not function properly.

    편집

  9. Motorola RIZR Z3 Motherboard Replacement: 8 단계, 이미지 1/2 Motorola RIZR Z3 Motherboard Replacement: 8 단계, 이미지 2/2

    • Use a plastic opening tool to gently pry the motherboard up until you can tilt it with your fingers. Unhook it from the casing and slowly pull it out.

    • Caution: Do this gently Unclipping too fast may cause damage to your phone.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 5명과 함께

Andrew Brock

회원 가입일: 10/07/11

8 평판

안내서 1개 작성함

배지: 8

배지 +5개 더

팀

Cal Poly, Team 5-34, Amido Fall 2011 Cal Poly, Team 5-34, Amido Fall 2011 회원

CPSU-AMIDO-F11S5G34

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 1

전체 시간: 1,321