소개

This guide will show you how to install the upper casing of the phone. This guide is necessary in order to remove the LCD screen or the call speaker.

부품

부품은 필요하지 않습니다.

  1. Remove the back cover by pressing down the silver button. Pull the cover away from the phone.
    • Remove the back cover by pressing down the silver button.

    • Pull the cover away from the phone.

  2. Remove the battery by pushing down on the top and pulling it away from the phone, similar to the cover. Remove the battery by pushing down on the top and pulling it away from the phone, similar to the cover.
    • Remove the battery by pushing down on the top and pulling it away from the phone, similar to the cover.

  3. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Use tweezers to pry off all four rubber screw covers from the inside face, pulling them towards you.
    • Use tweezers to pry off all four rubber screw covers from the inside face, pulling them towards you.

    • Our phone is missing the two left screw covers, be careful not to lose yours too!

  5. Remove the four T5 Torx screws that were underneath the rubber covers.
    • Remove the four T5 Torx screws that were underneath the rubber covers.

  6. Use the plastic opening tool to pry the top cover away from the phone.
    • Use the plastic opening tool to pry the top cover away from the phone.

    • The side buttons on the phone may fall out when the top cover is separated from the phone. They can easily be put back by placing them in their original spot.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Ian Cottengim

회원 가입일: 2013년 04월 18일

82 평판

안내서 2개 작성하였습니다

Cal Poly, Team 3-46, Amido Spring 2013 Cal Poly, Team 3-46, Amido Spring 2013 회원

CPSU-AMIDO-S13S3G46

4 회원들

안내서 8개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 7

지난 30일: 24

전체 시간: 2,162