소개

How to replace the logic board.

  1. Depress the silver button. Pull from top of phone to lift the cover.
    • Depress the silver button.

    • Pull from top of phone to lift the cover.

  2. Hold battery from both sides at the bottom. Push upwards and gently lift to remove.
    • Hold battery from both sides at the bottom.

    • Push upwards and gently lift to remove.

  3. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Remove 4 screws from corners using T-6 screwdriver.
    • Remove 4 screws from corners using T-6 screwdriver.

    • NOTE: Bottom two screws are gold.

    • NOTE: Make sure screws return to correct place when reassembling.

  5. Use a plastic opening tool to pry up back cover from the two side clips. NOTE: sticker might be attached to rest of phone.
    • Use a plastic opening tool to pry up back cover from the two side clips.

    • NOTE: sticker might be attached to rest of phone.

  6. Remove the back cover.
    • Remove the back cover.

  7. Use a plastic opening tool to gently remove the orange ribbon cable. Lift up the main logic board to remove.
    • Use a plastic opening tool to gently remove the orange ribbon cable.

    • Lift up the main logic board to remove.

결론

To reassemble your device, follow these instructions in reverse order.

Ryan Kuroiwa

회원 가입일: 2010년 04월 10일

1 평판

안내서 5개 작성하였습니다

Cal Poly, Team 25-86, Amido Spring 2010 Cal Poly, Team 25-86, Amido Spring 2010 회원

CPSU-AMIDO-S10S25G86

5 회원들

안내서 10개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 2,245