주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

This guide will cover the steps on how to remove the back plate of a Motorola V60i.

부품

지정된 부품이 없습니다.

  1. Flip the phone over to see back cover. Using either finger or spudger tool press button located  near the top of phone by the antenna.
    • Flip the phone over to see back cover.

    • Using either finger or spudger tool press button located near the top of phone by the antenna.

  2. Pry up back plate from phone to reveal battery. Push button near bottom of battery using either your finger of the spudger.  This will release the battery.
    • Pry up back plate from phone to reveal battery.

    • Push button near bottom of battery using either your finger of the spudger. This will release the battery.

  3. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  4. Using a T6 Torx Screwdriver, remove the four torx screws from the back of the phone.
    • Using a T6 Torx Screwdriver, remove the four torx screws from the back of the phone.

  5. Simultaneously press the highlighted buttons on both sides of phone. Simultaneously press the highlighted buttons on both sides of phone.
    • Simultaneously press the highlighted buttons on both sides of phone.

  6. Separate back plate from the rest of phone.
    • Separate back plate from the rest of phone.

    • Do not pull the wire connecting the front and back plates.

결론

To reassemble your device, follow these instructions in reverse order.

Elizabeth OBrien

회원 가입일: 2010년 04월 26일

31 평판

안내서 7개 작성하였습니다

Cal Poly, Team 30-40, Garner Spring 2010 Cal Poly, Team 30-40, Garner Spring 2010 회원

CPSU-GARNER-S10S30G40

4 회원들

안내서 14개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 10

전체 시간: 3,255