이 버전에는 잘못된 편집 사항이 있을 수 있습니다. 최신 확인된 스냅샷으로 전환하십시오.
필요한 것
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Flip the phone over so the back cover is facing up.
-
Using either a finger or a spudger, press the button located near the top of the phone by the antenna.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Pry up the back plate from the phone.
-
Push the button near the bottom of the battery using either your finger or the spudger to release the battery.
-
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Using a T6 Torx screwdriver, remove the four screws from the back of the phone.
-
거의 끝나갑니다!
결승점