기기를 수리하세요 커뮤니티 상점

Motorola V710 Speaker Replacement

소개

This repair guide shows how to replace a bad speaker.

필요한 것

  1. Motorola V710 Speaker Replacement, Battery: 1 단계, 이미지 1/3 Motorola V710 Speaker Replacement, Battery: 1 단계, 이미지 2/3 Motorola V710 Speaker Replacement, Battery: 1 단계, 이미지 3/3

    • Press down on the back button while pulling away from the body of the phone to release the back cover.

    편집

  2. Motorola V710 Speaker Replacement: 2 단계, 이미지 1/3 Motorola V710 Speaker Replacement: 2 단계, 이미지 2/3 Motorola V710 Speaker Replacement: 2 단계, 이미지 3/3

    • Remove the battery from the phone by gently pulling upward on the battery with your fingers.

    편집

  3. Motorola V710 Speaker Replacement, Logic Board: 3 단계, 이미지 1/2 Motorola V710 Speaker Replacement, Logic Board: 3 단계, 이미지 2/2

    • Unscrew and remove the antenna by gripping the base and twisting clockwise.

    • Once the antenna has passed the threading, pull out.

    편집

  4. Motorola V710 Speaker Replacement: 4 단계, 이미지 1/2 Motorola V710 Speaker Replacement: 4 단계, 이미지 2/2

    • Remove the screws from the upper side of the phone with the T6 Torx screwdriver.

    • The first screw is underneath where the antenna was and the other is visible to the right.

    편집

  6. Motorola V710 Speaker Replacement: 5 단계, 이미지 1/3 Motorola V710 Speaker Replacement: 5 단계, 이미지 2/3 Motorola V710 Speaker Replacement: 5 단계, 이미지 3/3

    • Insert the spudger under the left corner of the bottom plate.

    • Using a twist and pry motion seperate the bottom plate and work your way to the right.

    • This can be somewhat difficult and require a good deal of work.

    편집

  7. Motorola V710 Speaker Replacement: 6 단계, 이미지 1/2 Motorola V710 Speaker Replacement: 6 단계, 이미지 2/2

    • Use the T6 Torx screwdriver to remove the bottom two screws.

    편집

  8. Motorola V710 Speaker Replacement: 7 단계, 이미지 1/2 Motorola V710 Speaker Replacement: 7 단계, 이미지 2/2

    • Insert the spudger between the key plate and the back of the phone and work your way around the edge of the phone to pop keys off.

    • There is one clasp on either side that needs to be removed before the keys come off.

    • This step is extremely hard and may require time, strength, endurance, and multiple spudgers.

    편집

  9. Motorola V710 Speaker Replacement: 8 단계, 이미지 1/3 Motorola V710 Speaker Replacement: 8 단계, 이미지 2/3 Motorola V710 Speaker Replacement: 8 단계, 이미지 3/3

    • Pull the pressure plate forward to expose the logic board.

    • Use the spludger to pry off the plug that connects pressure pad to the logic board.

    • Remove the pressure pad.

    편집

  10. Motorola V710 Speaker Replacement: 9 단계, 이미지 1/1

    • Use the spudger to pry off the plug that connects logic board to the screen.

    편집

  11. Motorola V710 Speaker Replacement: 10 단계, 이미지 1/2 Motorola V710 Speaker Replacement: 10 단계, 이미지 2/2

    • Remove the logic board.

    편집

  12. Motorola V710 Speaker Replacement, Replacing Speaker: 11 단계, 이미지 1/2 Motorola V710 Speaker Replacement, Replacing Speaker: 11 단계, 이미지 2/2

    • Use the spudger take the speaker out.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Karl Sanders

회원 가입일: 01/26/10

8 평판

안내서 7개 작성하였습니다

배지: 6

배지 +3개 더

팀

Cal Poly, Team 8-49, Regan Winter 2010 Cal Poly, Team 8-49, Regan Winter 2010 회원

CPSU-REGAN-W10S8G49

5 회원들

안내서 16개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 1,036