1. Turn off the phone.
    • Turn off the phone.

    • Turn the device over.

    • Remove the battery cover.

    • Insert thumb in the gap between the button and the battery and pry the battery upwards.

    • Pull the battery out of the phone.

  2. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  3. Insert the new battery.
    • Insert the new battery.

  4. Four 5 mm screws are visible (circled in red).
    • Four 5 mm screws are visible (circled in red).

    • Using the T6 tool, remove all four 5mm screws and set them aside.

  5. Insert the plastic opening tool between the front and back panels of the lower half of the device. Slide the tool around the entire frame of the device until it has loosened. Remove the back of the device.
    • Insert the plastic opening tool between the front and back panels of the lower half of the device.

    • Slide the tool around the entire frame of the device until it has loosened.

    • Remove the back of the device.

결론

To reassemble your device, follow these instructions in reverse order.

Information on recycling/disposing of your electronic waste is located under Additional Information on the device page.

Justin Scott

회원 가입일: 2014년 03월 26일

501 평판

안내서 5개 작성하였습니다

Clemson, Team 6-3, Benson Spring 2014 Clemson, Team 6-3, Benson Spring 2014 회원

CLEM-BENSON-S14S6G3

3 회원들

안내서 18개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 122