주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

부품

지정된 부품이 없습니다.

  1. Use a Phillips #1 screwdriver to remove the two 9mm screws and the three 11mm screws on the bottom of the coffee maker and remove the bottom plastic cover. Use a Phillips #1 screwdriver to remove the two 9mm screws and the three 11mm screws on the bottom of the coffee maker and remove the bottom plastic cover. Use a Phillips #1 screwdriver to remove the two 9mm screws and the three 11mm screws on the bottom of the coffee maker and remove the bottom plastic cover.
    • Use a Phillips #1 screwdriver to remove the two 9mm screws and the three 11mm screws on the bottom of the coffee maker and remove the bottom plastic cover.

  2. Using a Phillips #1 screwdriver, remove 12mm screws from heating element bracket and remove bracket. Using a Phillips #1 screwdriver, remove 12mm screws from heating element bracket and remove bracket. Using a Phillips #1 screwdriver, remove 12mm screws from heating element bracket and remove bracket.
    • Using a Phillips #1 screwdriver, remove 12mm screws from heating element bracket and remove bracket.

  3. Nintendo Switch 키트

    게임으로 돌아가기 위한 빠른 해결책

    Nintendo Switch 키트 쇼핑하기

    Nintendo Switch 키트

    게임으로 돌아가기 위한 빠른 해결책

    Nintendo Switch 키트 쇼핑하기
  4. Remove 2 hose clamps from heating element. Remove heating element from tubes. Remove 2 hose clamps from heating element. Remove heating element from tubes.
    • Remove 2 hose clamps from heating element. Remove heating element from tubes.

  5. Using a Phillips #1 screwdriver, remove one  10mm screw, and three 11mm screws connecting the reservoir to the base and remove reservoir from the base. Using a Phillips #1 screwdriver, remove one  10mm screw, and three 11mm screws connecting the reservoir to the base and remove reservoir from the base. Using a Phillips #1 screwdriver, remove one  10mm screw, and three 11mm screws connecting the reservoir to the base and remove reservoir from the base.
    • Using a Phillips #1 screwdriver, remove one 10mm screw, and three 11mm screws connecting the reservoir to the base and remove reservoir from the base.

결론

To reassemble your device, follow these instructions in reverse order.

Michael Chhim

회원 가입일: 2017년 03월 21일

202 평판

안내서 2개 작성하였습니다

UMass Dartmouth, Team S2-G2, Isaacson Spring 2017 UMass Dartmouth, Team S2-G2, Isaacson Spring 2017 회원

UMASSD-ISAACSON-S17S2G2

3 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 3

30일 전: 12

전체 시간: 275