NABI XD Rear panel Replacement - iFixit 수리 안내서

소개

This is the first step when replacing any component in the NABI XD. This guide should be used when fixing any part of your device.

필요한 것

1 단계 Rear panel

NABI XD Rear panel Replacement, Rear panel: 1 단계, 이미지 1/2

NABI XD Rear panel Replacement, Rear panel: 1 단계, 이미지 2/2

Use the plastic opening tool at the top left corner seam, then pry the corner apart.

2 단계

NABI XD Rear panel Replacement: 2 단계, 이미지 1/1

Next slide the plastic opening tool across the sides of the Nabi. It will slowly open.
There are small plastic clips that need to be release. Gently apply outwards pressure until the clips give.
Go around the NABI XD and separate the rear panel from the device.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Marissa Schiereck

회원 가입일: 09/15/16

638 평판

안내서 6개 작성하였습니다

배지 +10개 더

팀

USF Tampa, Team 17-2, Blackwell Fall 2016 USF Tampa, Team 17-2, Blackwell Fall 2016 회원

USFT-BLACKWELL-F16S17G2

3 회원들

안내서 12개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 2

전체 시간: 189